Rimage PrismPlus! Guide de l'utilisateur télécharger pdf (Page 48)

Status Messages

Status messages that might appear while operating the CD printer are described in

this section. The printer stops when an error occurs. The following figure and table

show the Control panel’s *LEDs and Status Messages indicated on the LEDs.

Unit Attention Button

Error LED

Missing CD LED

Active LED

rLED

Status Message Description

Idle The green Power LED lights when the printer is powered on.

Printing The yellow Active LED flashes when the printer is printing.

Missing CD The yellow Missing CD LED lights when the drawer is empty. When a CD is

placed on the drawer, the Missing CD LED turns off. In Multiple Copy mode,

the Missing CD LED will light until the CD is removed from the pad.

Cleaning The yellow Missing CD LED and the yellow Unit Attention LED flash when the

printer is in the cleaning mode.

Error The yellow ERROR LED is located in the Unit Attention button, and lights up

when an error occurs while printing.

The Missing CD LED indicates the problem by the flashing the error code.

After the problem is solved, push the Unit Attention button to turn the LED off.

The green Power LED flashes when the PCB needs reprogramming.

See the error code listing, on page 48 for more information.

Print Integrity Check The Power LED will turn off if a bad element is detected. The Power LED will

turn back on if a disc is placed on the tray.

The printhead is checked every time the drawer is opened without a disc

present on the tray.

See the error code listing, on page 48 for more information.

Reprogramming

Required

Power LED flashes.

Low Ribbon Missing CD LED flashes continuously at a slow rate.

Ribbon Out Missing LED flashes at a slow rate while the error LED is on.

AutoPrinter Mode Active LED flashes continuously at a slow rate.

*LED – Light Emitting Diode

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 74 75

Pas de commentaire

Rimage PrismPlus! Guide de l'utilisateur Page 48