Rimage AutoEverest AutoPrinter Guide de l'utilisateur télécharger pdf (Page 16)

Maintain the AutoPrinter

110656_L 13

26BPrismPlus! Printer

@ Required Tools:

• Torx T25 screwdriver

• 5/32″ Allen wrench

1. Power on the AutoPrinter.

& Tip: If the Prism power switch is in the On position, you can power on both the printer and the

AutoPrinter by pressing the AutoPrinter power switch.

2. Wait for the system to complete initialization.

3. Prepare the system for alignment.

a. Manually slide the lift arm to the top of the

AutoPrinter.

b. Place a disc on the lift arm by pressing the

disc into the gripper while pressing the

disc release button.

c. Release the disc release button. The

gripper holds the disc.

d. Press the printer operator button to open

the printer tray.

4. Align the printer.

a. Slowly slide the lift arm

down until the disc just

touches the print pad.

Lift

Arm

Gripper

Disc Release Button

Printer

Operator

Button

Side-to-Side

Alignment

Pad

Lift

Arm

Holding Pins

Disc

1 2 ... 11 12 13 14 15 16 17

Pas de commentaire

Rimage AutoEverest AutoPrinter Guide de l'utilisateur Page 16