Rimage DLN5200 Guide de l'utilisateur télécharger pdf (Page 17)

Rimage DL5200/DLN5200 User Guide

12 110768_E

c. Manually rotate the lead screw

counterclockwise to move the lift arm

down to the print pad.

3. Check the disc alignment.

Print Pad

Lead Screw

To see if the disc is centered, observe

the gap between the edge of the disc and

the raised edges as shown by the

arrows.

If the disc requires side to side

alignment, continue to step 4.

If the disc requires front to back

alignment, continue to step 5.

4. If necessary, perform a side to side

alignment.

a. Loosen the two side to side

alignment screws.

b. Slide the printer until the side gaps

are equal.

- Important! Slide the entire

printer, not the printer tray.

c. Tighten the two side to side

alignment screws.

Front to Back Alignment Screw

Side to Side Alignment Screws

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 23 24

Commentaires sur ces manuels

Pas de commentaire