Rimage DLN5200 Guide de l'utilisateur télécharger pdf (Page 19)

Maintain the DLN5200/DL5200

3. Check the disc alignment.

To see if the disc is centered, observe

the gap between the edge of the disc and

the raised edges as shown by the

arrows.

If the disc is not centered side to side on

the print pad, continue to step 4.

Print Pad

If the side to side alignment is correct, go

to step 5.

4. If necessary, perform a side to side

alignment.

a. Loosen the two side to side

alignment screws.

b. Slide the printer until the side gaps

are equal.

Lead Screw

- Important! Slide the entire

printer, not the drawer.

c. Tighten the two side to side

alignment screws.

Front to back Alignment Screw

Side to side Alignment Screws

110768_D 13

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 25 26 27

Commentaires sur ces manuels

Pas de commentaire