Rimage DLN5200 Guide de l'utilisateur télécharger pdf (Page 20)

Rimage DLN5200/DL5200

14 110768_D

5. If necessary, perform a front to back

alignment.

a. Turn the front to back alignment

screw until there is a 1/16” (1.5mm)

gap between the front edge of the

disc and the raised edge of the disc

retainer.

# Tip: You can use the T25 Torx

driver, or 5/32” Allen wrench, to

turn the front to back alignment

screw.

b. When the printer is aligned, rotate

the lead screw to raise the lift arm

up about 1.0” (2.5 cm).

Disc Retaine

r

Ga

p

Distance

6. Exit diagnostics.

a. Press and hold the operator

button to exit diagnostic 4. The

disc is lifted up to the top output

tray and released.

Lift Arm

b. Press the operator button

fourteen times and hold on the

last press to exit diagnostics.

Print Pad

c. Press the operator button one

more time to close the print

drawer.

Lead Screw

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 26 27

Commentaires sur ces manuels

Pas de commentaire